2003-2007 CHEVROLET SILVERADO GMC SIERRA REMOTE STARTER w/RKE

Description

"FOR THE CAR-SAVVY "DIY" INSTALLER"
All our
WIRE2WIRE
systems include a
vehicle specific step-by-step installation guide
with COLOR PHOTOS
that will indicate exactly what wire from the system connects to what wire in your
2003 through 2007
SILVERADO/SIERRA w/GAS ENGINES VERSION
(2007 CLASSIC BODY STYLE ONLY)
, where the wire is located, and how to confirm that you found the correct wire using
the kits supplied test probe
. All of the systems connections are made utilizing 3M style T-Taps to provide quick and clean connections that eliminate the need to directly splice in or solder the wires. The system's wiring comes pre-harnessed with machine-crimped insulated male spade connectors on the end of the wires.
The system also carries a 3-YEAR LIMITED WARRANTY directly through our company with
LIFETIME TECHNICAL SUPPORT Available 64 Hours a Week, 7 days a Week by Email, LIVE CHAT, or Phone
(ON EASTERN TIME)
FOR ALL 2003-2007 CLASSIC CHEVY SILVERADO & GMC SIERRA TRUCKS
WITH GAS ENGINES & AUTOMATIC TRANSMISSIONS ONLY
Complete Vehicle Specific Ready
Remote Starter and Keyless Entry Kit for All 2003 through 2007 (2007 CLASSIC Body Style Only) Chevrolet Silverado and GMC Sierras with GAS Engines & Automatic Transmissions.
2 x 3-Button Remotes
with separate LOCK, UNLOCK, and Remote Start Buttons/Icons.
Up to 1500' Remote Range:
Remotely LOCK, UNLOCK, and REMOTE START your truck from up to 1500 feet away.
Adjustable Remote Starter Run Time
:
15 Minutes is the Default Run Time. Can easily be adjusted after installation to a 5, 10, 20, 45, or 60 Minutes Run Time.
Built-In Troubleshooting:
The system will flash codes through the vehicles' parking lights to indicate what may be inhibiting the system from working.
Tach or Tachless Mode Installation
:
Tachless Mode Installation is the Default. Can be changed anytime during or after Installation to Hard-Wired tachometer connection.
FAILSAFE™
Design
: In the rare event that any fault with the system occurred, it will not prevent you from being able to start your vehicle with the keys.
HVAC Activation
:
Pre-set your vehicle's HEAT/DEFROST or AC settings and the system will activate it 15 seconds after the vehicle is remote started.
On-Board GM PASSLOCK-II/Power Door Locks Bypass Interface
:
No need to wire an external bypass kit up between the system and the vehicle's wiring, it's built into the system.
QwikSync™
System Reset Feature
:
In the event that your vehicle is serviced, and whatever was done to the vehicle effected the remote starter from working (which can happen with any brand or model of remote starter system on the market) the system can easily be reset back to when you originally installed it and working properly, with just 3 steps.
14-DAY QC MONEY BACK GUARANTEE*
Step-by-Step Installation Guide
:
Indicates exactly what color wire from the system connects to what color wire in the vehicle, where the wire is located in the vehicle, and how to confirm you found the correct wire using the kits supplied LED style test probe (LED in the handle of the test probe lights RED for positive polarity, GREEN for negative).
Demo color photos
of the vehicle's wiring in the vehicle included in the step-by-step installation manual.
Installation Connector Package
:
All the Quick-Connect T-Taps, Self-Tapping Screws, Zip-Ties etc. that you will need to make the connections to the vehicle are included.
COOL FEATURES:
Pit-Stop Mode
:
A cool feature that allows you to keep the engine running without leaving the keys in the ignition: While the engine is still running with the keys, just press the remote start button on the remote 2X, and when you turn off the ignition and remove the keys to exit the vehicle, the engine, heat or AC will remain running for the duration of the current remote start run time (or you can press the button on the remote 2X again to shut it down sooner.
Car Finder Feature
:
Press & holding either the lock or unlock button on the remote will activate the car finder feature that will flash the vehicle's parking lights and pulse the vehicles horn. Great for locating your vehicle in dark crowded parking lots.
Silent Choice Horn Beep Confirmation:
The system sends a quick pulse to the vehicle's horn on the 2nd press of the remotes button for sound confirmation when you use the remotes to lock or unlock the vehicles doors and when the remote starter is activated. Horn beep confirmation can be easily turned ON/OFF any time after installation if you prefer the system with the horn beep feature totally OFF or instead sounding on the 1st press of the remotes buttons.
Valet Remote Start ON/OFF Mode:
The system has an easily activated valet mode where the remote start feature can be temporarily turned off yet still enable the vehicle to be remotely locked and unlocked. Mainly used when servicing the vehicle.
Key Take-Over Feature:
Vehicle remains running after the drivers' door is opened, no need to restart the vehicle with the key. Soon as the ignition is turned ON, and you step on the brake to shift the vehicle into gear, the remote starter will automatically shut down but the vehicle will remain running.
Safety Brake Pedal Shut-Down Input:
Mandatory connection that will immediately shut down the remote starter system if you step on the vehicle's brake pedal before you put the key's into the ignition and turn the ignition on.
Parking Lights Flash Confirmation:
The system will flash the vehicles parking lights when you lock or unlock the doors and right after you activate the remote starter. After remote start activation it will turn the parking lights on solid shortly afterwards to confirm that the vehicle is running by the remote starter.
Security AUTO-LOCK after Remote Start:
After Installation, if your the type that
leaves
your vehicles' doors unlocked a lot, the system can be programmed to automatically LOCK the vehicle's doors after the vehicle has been remote started so it's not sitting there running with the doors unlocked; Even though if someone did jump in when the vehicle is running by the remote starter, the system would shut down soon as they stepped on the brake pedal anyways, this setting just prevents someone from getting in in the first place.
Safety 2-Press Remote Start Activation:
The remote starter is activated by pressing the remote start button (circle arrow button) on the remote 2X within 3 seconds. This setting helps prevent any accidental activation that could occur with just a single press activation setting.
Multiple Remotes Capability
:
The system has the ability to work with one or two more additional remotes for a total of up to 4 remotes at the same time. Additional remotes information supplied in with the system.
Professional Grade System
:
Meets or Exceeds OEM Specifications: The components we use in our Vehicle
Specific
System designs are manufactured by the VOXX Electronics Corporation, providers of leading name brands like Code Alarm, Prestige, Pursuit, and Viper, and many more. And are a leading provider of electronic components to some of the largest automotive manufacturers in the world.
3-Year Limited Warranty:
MotorCityRemotes will repair or replace this system if we find that it has failed from manufacturer quality under normal everyday use for a period of 3 years from date-of-delivery (1 Year on Remotes, cosmetic wear, cases, and batteries are not covered, functional failures only). Any and all malfunctions MUST be declared by a MotorCityRemotes Technician by contacting our technical support service (all company contact information will be in with the system). Return shipping cost is buyers responsibility.
All shipping costs of warranted components returned back to you
are covered under warranty
.
*Not happy with the Quality of our systems?
If after you take delivery of your system and you find that our system is not up to your expectations after evaluating all the components and information you received, arrangements
for a return refund, exchange, or store credit for any purchase from MotorCityRemotes can be made within
14 days from date-of-delivery
providing the components are in the exact same uninstalled condition as received including any originally sealed component packaging, any and all manuals, and any an all included accessories.
Return shipping cost are buyers responsibility. Just provide your ORDER ID to our customer service at: (number provided in with system) to obtain Return Merchandise Authorization (RMA#). Due to the sensitivity of electronic components, ANY attempted installation of the system will
VOID
the return option; Only warranty repair, replacement, and technical support will be provided.
QUESTIONS?
Just ask
, we are available from 9am-7pm M-Fri, 9am-5pm Sat, and 9am-3pm on Sundays ET. Closed on Major Holidays and Holiday Weekends.
Ships within 2-3 Business Days, 2-3 Day USPS Priority Mail for just .95 within the USA and it's
Territories Only