AKRA Cheater Carburetor GAS Stock Appearing Clone Go Kart Outlaw Racing

Description

AKRA Cheater Carburetor (will not pass AKRA tech)
Visit and FOLLOW my eBay store for more carburetor selections and new products.
This carburetor is BOLT ON performance!!!!!  Add instant power to your Predator 212 or any other clone type engine.  Very Stock Appearing!!  Will work with your existing throttle linkage systems on most engines.  This carburetor should be used with an open air filter and big pipe, it is not suitable for stock airbox and muffler.
This carb is for those nights when the tech man isn’t looking….and you need a little extra giddy up and go!! It will pass a visual tech on the outside but will fail if the air filter is pulled off and tech looks inside.
This carburetor will add 1 to 1.5 additional horsepower to a stock Clone engine! It may also work great for other builds too.
The choke has been cut and siliconed in place to look stock from the outside!!
The venturi of this carburetor is .615 and will pass a .615 no go tech. The Venturi has been hand worked for additional flow.  The butterfly throttle bore is .750 and will pass a .750 no go tech.
The throttle shaft has been thinned and an aftermarket THIN butterfly has been used. The butterfly screw is a special aftermarket screw that further increases flow, see pictures.
This carburetor flows VERY well and will make GREAT power on an engine with upgraded cam and valve springs. This carb works well with the STOCK predator heads that have the 27/25 valve size.  No additional porting is needed on a predator head as this carb will match very well with the predator heads. The carb has been flowed on a Superflow 60 flowbench with the fuel signal set.  It is set up for
GAS only.
The carb may need to be rejetted for your specific area and engine to achieve maximum performance.  If this carb is used for cruising on a mini bike a smaller low jet may be needed. It is set up rich on the idle for racing purposes. The black insulator between the head and carb may need to be opened up for maximum performance.
If you have questions please ask before purchasing.  I can change some settings and jetting if you know what you would need.
Thank you!!