-40%
BB30/Pressfit30 - 30mm Spindle Spacers - Choose Size! BB30 PF30 SRAM Cannondale
$ 6.33
- Description
- Size Guide
Description
HomeAbout Us
Payment
Shipping
Returns
Contact Us
30mm Bottom Bracket Spindle Spacers
Item Description
In our retail store, we install Cannondale's Hollowgram crankset system on nearly every new bicycle we build. Historically, we have stocked every single small replacement part needed to either retrofit, or accommodate these systems on just about any frame platform imaginable. Cannondale does a good job of categorizing (and making available) all of the parts needed for fresh installations and maintenance aside for one - the tricky spindle spacers, which vary depending on numerous factors including shell width, chain-line and ring configuration, and spindle width. You could purchase a complete bottom bracket which would include the appropriate spacers, but if you wanted to do a custom install or if you lost one - you were SOL.
With the introduction of the new 109mm Road and 137mm Mountain spindle standards - the formula used to determine the correct spindle configuration became even more tricky.
It got to the point that we ended up needing to fabricate the spacers needed for certain applications. We kept getting phone calls, emails and visits from consumers wanting spacers - and we had to turn them down, which more often than not led to using stacked plastic "shims", which are really a band-aid for a clean and accurate setup; we simply didn't have any extra's we could afford to spare outside of our shop use - unit now!
To solve the problem, we went to our friends who own a Government-contracted, Aerospace, ISO certified fabricator to make us exactly what we needed. What we ended up with is what you see here in this listing. The only BB30 spindle spacers intended specifically for Cannondale applications that are commercially available. Made to our exacting specifications - and based on Cannondale's tech-handbook sizing for appropriate spacing on nearly every new, and legacy platform ever made.
How do I know Exactly Which Spacers I need?
We have created a tech diagram which is available on our website, however below you will see a cheat-sheet for the most popular road and mountain configurations. You can also measure the spindle-gap. Most systems allow for frame/bearing tolerance of +/- 2mm or so; you can micro-tune these gaps with traditional BB30 "shims"
EXAMPLE OF SPACERS NEEDED FOR ROAD SYSTEMS UTILIZING A 109MM SPINDLE
PF30 BB with a 68mm Shell: (2013-2015 SuperSix EVO)
One 7.5mm flanged spacer for the non-drive side
+
one 2.6mm non-flanged for the drive side.
PF30 BB with a 73mm Shell: (2016+ SuperSix EVO II)
One 2.5mm flanged spacer for the non-drive side
+
one 2.6mm non-flanged for the drive side.
BB30 BB with a 68mm Shell: (CAAD8-10, First Generation SuperSix, 2008-2013 Synapse)
One 7.5mm flanged spacer for the non-drive side
+
one 2.6mm non-flanged for the drive side..
BB30 BB with a 73mm Shell: (2014+ Synapse, 2016+ CAAD12)
One 2.5mm flanged spacer for the non-drive side
+
one 2.6mm non-flanged for the drive side.
EXAMPLE OF SPACERS NEEDED FOR MOUNTAIN SYSTEMS UTILIZING A 137MM SPINDLE
PF30 BB with a 73mm Shell: (2012-2016 Scalpel 29)
One 19.0mm flanged spacer for the non-drive side
+
one 14.1mm non-flanged for the drive side.
PF30 BB with a 83mm Shell: (2017+ Scalpel-Si, 2015+ F-Si)
One 14.0mm flanged spacer for the non-drive side
+
one 9.1mm non-flanged for the drive side.
BB30 BB with a 68mm Shell: (2003-2011 Scalpel 26", 2009-2014 Flash F26, F29)
One 19.0mm flanged spacer for the non-drive side
+
one 19mm flanged for the drive side.
BB30 BB with a 73mm Shell: (2013-2016 Trigger, Jekyll and Claymore)
One 14.0mm flanged spacer for the non-drive side
+
one 19.0mm flanged for the drive side.
*Have a different configuration or unsure about what spacers you need? Please contact us!
Spacer Specifications:
- CNC'd from 6061 Aerospace Grade Aluminum
- Black Anodized with MilSpec hard coat
- ISO Certification
- Tolerance is down to .01 Mil for accuracy
Warranty Information:
These are manufactured to our exacting specifications, the quality of these parts are higher than anything else typically offered in the bike industry. Will replace them if anything were to go wrong with them - forever. No questions asked.
Returns
:
Domestic returns accepted - 30 Day return policy. If you have any questions at all, please let us know before making the purchase. We are here to help!
ABOUT US
Payment
Shipping
Returns
Contact Us
ABOUT US
Located in Orange County, California - We are a full service retail bicycle boutique specializing in custom builds, particularly Cannondale. We carry all of the hard to find parts and accessories, including all service parts for nearly every Cannondale platform in existence. Don't see what your looking for? Get in touch and we can most likely help you out.
Payment
We accept PayPal for all online purchased.
Shipping
We ship 5 days per week. Orders placed before 2:00pm PST will normally ship same day. We ship most small parts via USPS and complete bikes, frames and larger parts via UPS.
Returns
We do our best to clearly describe all items accurately. Most purchases on eBay are considered by us to be Final unless otherwise stated in the auction terms and conditions.
Contact Us
Please feel free to give us a call or send us an email if you have any questions, or need further assistance.
Shop Categories
Brakes
Cannondale Parts
Cassettes
Clothing
Complete Bikes
Cranksets
Forks
Framesets
Front Derailleurs
Groups
Handlebars
Other
Rear Derailleurs
Saddles
Seatposts
Service Parts
Shifters
Stems
Tires
Wheels
Helpful Links
Add to favourite seller
Ask seller a question
About Us
Contact Us
View Feedback
Visit Our eBay store
ebay listing template design by