JOHNSON EVINRUDE OMC BRP E-Tec OUTBOARD motor ENGINE LIFTING RING TOOL EYE

Description

Free shipping for a LIMITED time
This is a new engine lifting ring /eye for an OMC, Evinrude, Johnson, BRP, ETEC outboard motor.
There are at least 3 different engine lift ring tools used for the OMC / Evinrude / Johnson BRP, ETEC outboards.  So, before you purchase this, please make sure that this tool will fit your outboard as it will
NOT
work on all models of those outboards.
Photo 1 ->  Shows the lift ring attached to the top of the outboard flywheel.
Photo 2 ->  A picture of the type of flywheel that will work with this tool.
The important thing is that the flywheel must have 3 equally spaced tapped holes about 1 3/8 +- from the center of the flywheel
Photo 3--> Shows the pieces that you will get. The round part in the upper left corner is 1/4" steel which is cut out using a CNC laser machine.  The 3 bolts and washers on the upper right are 5/16 fine thread grade eight.  On the lower left is the lifting ring itself, a washer and a 1/2" stainless steel lock nut.
Photo 4-> The tool put together .  The washer goes on the bottom and you would thread the nut in until at least the threads go all the way through the nylon portion of the lock nut.  This will ensure that the nut will not spin off when you have the outboard hanging in air.
Photo 5-> How the tool looks like when you have the bolts and washers inserted into the slots on top of the round part.
The ring itself is rated at nearly 2,500 pound which is *WAY* more then any outboard weighs.
Any questions?   Please ask.  If at all in doubt, send me a picture of the top of your flywheel.
thanks for looking and please scope out my other listings.