Johnson-Evinrude, Faststrike-Intruder, V4-V6, Easy Timer Ignition Analyzer

Description

JohnnyRude
Johnson-Evinrude
Faststrike-Intruder
V4-V6
Easy Timer
Free 90 day repair warranty
This Easy Timer allows you to set the ignition timing on all motors equipped with the OMC optical (OIS2000) ignition system with carbs, including the Faststrike and Intruder 60 degree V4 and V6 motors.
Timing can be set accurately without running the motor (as detailed in the OMC service manual) and is the recommended way of setting the timing for these motors. This Easy
Timer can be used for setting the idle and maximum timing. The Easy Timer is simply
plugged into the outboards optical sensor connector and the 12 volt red lead is connected to the positive cable and the black negative lead is connected to a good motor ground.
As the crankshaft is rotated by hand the Cyl and Sync LED's will flash on and off, the timing is set as described in the enclosed Easy Timer instruction pages. A complete set of instructions and illustrations
are included and the 5 pages of instructions, printed from the OMC service manual, every thing you need to know to set the timing and sync the timing and carbs.
The Easy Timer will also test the  optical sensor, as the motor is rotated the red cylinder light turns on and off, if it only dims the sensor is dirty or weak, if it does not turn off the sensor is dirty or bad.
This is a very good quality timing tool, built by a retired, OMC certified, Evinrude service tech. It is reverse polarity protected and fused. Each unit is bench tested and will work.
I have it listed as no returns, however I include a 90 day free repair warranty, buyer
pays return shipping.
The listed shipping is for the lower 48 states only, other shipping charges will be set by the zip code.
I would be happy to answer any questions, at any time, regarding the use of this timer.
942  units have been sold
A special thanks goes out to Chris Bowman  for helping make the Easy Timer possible.
I have been told of a site that is offering my timer at a far lesser price, this site is a scam to get your credit card number. I am the only person selling this timer new, I designed the final version, I build these timers for a hobby and to help folks with these motors
Thanks for looking,   Jerry,   316jughead