Predator 212cc Stage 1 Carburetor Bore Reamer Tapered 4 Box Stock & Modified USA

Description

Kart Racing Mini Bike Mud Motor Drift Trike Clone Predator 196cc 208cc 212cc
Carburetor Bore Reamer  Properly Tapered for Box Stock & Modified Venturi
These reamers have been properly tapered to allow anyone to anyone to get the most out of a stock type carburetor, Venturi size is often the most checked measurement if rules require a SA (stock appearing) Carburetor, Getting the MOST out of your carburetor requires you be at the MAX size allowed and at the smallest convergence point (it only has to be the checked size at one very small point) some rules state .615  while others state .650
This tool will allow you to do both or even LARGER  if your rules only state "stock appearing"   all of the made in china carburetors will benefit from a larger convergence point (the smallest point in the venturi) YOU CAN NOT DRILL YOUR CARBURETOR  with a round non tapered  drill bit and get good performance...
for a carburetor to properly draw and atomize fuel it must have a     taper > in and a taper < out.
I use this reamer by hand and  go very slow and measure often,  it is easy to get the Carb bore larger than you intend. I try to stay just BELOW the size stated in the rules so there is never an issue at the track.
If it is not checked or there are no carb bore rules this will create the ultimate Cheater Carburetor
I will pack this well and ship it fast for FREE 48 states only USPS with Tracking
Thank you for supporting racers who actually use the things they sell and are here to answer questions.